FR UAV Tutorials

Converting an RC aircraft into a UAV APM 2.5 / ArduFlyer 2.5 for full autonomy with GPS installation and configuration using Mission Planner Ground Control Station (GCS). Topics Covered Setting up hardware Loading Arduplane Firmware Radio Calibration Configuring...

SX260 CHDK Tutorial

What is CHDK? Canon Hack Developer Kit (CHDK) allows you to run special firmware on an SD card instead of the camera’s native firmware. It gives all sorts of additional functionality (depending on model), including the ability to run scripts (basic and lua) such...

Initial Setup of RTM UAV

INITIAL SETUP AND TESTING These instructions are intended for Flight Riot Mapping UAVs. For shipping purposes, the Horizontal Stabilizer is removed and must be installed along with proper positioning and installation of the Elevator servo controls. Once installed this...

Turnigy 9X and FrSky DJT – DIY Mod Tutorial

  The DJT radio doesn’t quite fit the Turnigy 9X even though the T9X is pinned out for JR style connection. The problem is there is a piece of plastic obstructing a successful fit. So, you must take the T9X Transmitter apart and remove the obstruction so...

Pin It on Pinterest